***
*** 6.3_jumpers.testplan: jumper testplan for DVM tutorial section 6.3
***
*?@ analysis	objective	jumper	source	load	label
***
Ac	BodePlot(OUTPUT:1)	Close(J1)	Source(INPUT:1, Nominal)	Load(OUTPUT:1, Light)	VOUT=1.505V|Bode Plot|Vin Nominal|Light Load
Ac	BodePlot(OUTPUT:1)	Close(J1)	Source(INPUT:1, Nominal)	Load(OUTPUT:1, 50%)	VOUT=1.505V|Bode Plot|Vin Nominal|50% Load
Ac	BodePlot(OUTPUT:1)	Close(J1)	Source(INPUT:1, Nominal)	Load(OUTPUT:1, 100%)	VOUT=1.505V|Bode Plot|Vin Nominal|100% Load
***
***	these tests use the new modified values				
***
Ac	BodePlot(OUTPUT:1)	Open(J1)	Source(INPUT:1, Maximum)	Load(OUTPUT:1, Light)	VOUT=0.6V|Bode Plot|Vin Maximum|Light Load
Ac	BodePlot(OUTPUT:1)	Open(J1)	Source(INPUT:1, Maximum)	Load(OUTPUT:1, 50%)	VOUT=0.6V|Bode Plot|Vin Maximum|50% Load
Ac	BodePlot(OUTPUT:1)	Open(J1)	Source(INPUT:1, Maximum)	Load(OUTPUT:1, 100%)	VOUT=0.6V|Bode Plot|Vin Maximum|100% Load
***