***
*** 6.4.6_nocurves_noscalars_nospecs.testplan: nocurves, noscalars, nospecs testplan for DVM tutorial section 6.4.6
***
*?@ analysis	objective	jumper	measurement	measurement	measurement	source	load	label
***
Ac	BodePlot(OUTPUT:1)	Close(J1)				Source(INPUT:1, Nominal)	Load(OUTPUT:1, Light)	VOUT=1.505V|Bode Plot|Vin Nominal|Light Load
Ac	BodePlot(OUTPUT:1)	Close(J1)				Source(INPUT:1, Nominal)	Load(OUTPUT:1, 50%)	VOUT=1.505V|Bode Plot|Vin Nominal|50% Load
Ac	BodePlot(OUTPUT:1)	Close(J1)				Source(INPUT:1, Nominal)	Load(OUTPUT:1, 100%)	VOUT=1.505V|Bode Plot|Vin Nominal|100% Load
***
***	these tests are retained from the original 6.3_jumpers.testplan
***
Ac	BodePlot(OUTPUT:1)	Open(J1)				Source(INPUT:1, Maximum)	Load(OUTPUT:1, Light)	VOUT=0.6V|Bode Plot|Vin Maximum|Light Load
Ac	BodePlot(OUTPUT:1)	Open(J1)				Source(INPUT:1, Maximum)	Load(OUTPUT:1, 50%)	VOUT=0.6V|Bode Plot|Vin Maximum|50% Load
Ac	BodePlot(OUTPUT:1)	Open(J1)				Source(INPUT:1, Maximum)	Load(OUTPUT:1, 100%)	VOUT=0.6V|Bode Plot|Vin Maximum|100% Load
***
***	these tests have our new nocurves, noscalars, and nospecs function calls
***
Ac	BodePlot(OUTPUT:1)	Open(J1)	NoCurves( DVM ILOAD )	NoScalars( INPUT:1 )	NoSpecs( OUTPUT:1 )	Source(INPUT:1, Maximum)	Load(OUTPUT:1, Light)	VOUT=0.6V w NoCurves NoScalars NoSpecs|Bode Plot|Vin Maximum|Light Load
Ac	BodePlot(OUTPUT:1)	Open(J1)	NoCurves( DVM ILOAD )	NoScalars( INPUT:1 )	NoSpecs( OUTPUT:1 )	Source(INPUT:1, Maximum)	Load(OUTPUT:1, 50%)	VOUT=0.6V w NoCurves NoScalars NoSpecs|Bode Plot|Vin Maximum|50% Load
Ac	BodePlot(OUTPUT:1)	Open(J1)	NoCurves( DVM ILOAD )	NoScalars( INPUT:1 )	NoSpecs( OUTPUT:1 )	Source(INPUT:1, Maximum)	Load(OUTPUT:1, 100%)	VOUT=0.6V w NoCurves NoScalars NoSpecs|Bode Plot|Vin Maximum|100% Load
***