*** auto-created testplan : 4.2_LTC3406B - DVM ADVANCED_efficiency.testplan
*** schematic name: 4.2_LTC3406B - DVM ADVANCED.sxsch
*** date: 4/24/2024
*** time: 4:24 PM
***
*** input parameters:
*** input voltages for (V2) : 
*** Minimum: 4.5V
*** Nominal: 5V
*** Maximum: 5.5V
***
*** output loads for (I1) in percent of full load:
*** 10, 20, 30, 40, 50, 60, 70, 80, 90, 100
***
*** using (1) cores
***
*** a total of (30) steps will be run.
*?@ LoadComponentValues	Analysis	Objective	Label	Create	Create	Create	Promote
lcv\4.2_LTC3406B - DVM ADVANCED_efficiency_change.compvalues.txt	Multi-Step	Steady-State	Efficiency|Run Multi-Step Efficiency Simulation	Alias(Efficiency,Efficiency_%V2_VALUE%)	
lcv\4.2_LTC3406B - DVM ADVANCED_efficiency_reset.compvalues.txt	NoSimulation		Efficiency|Generate Efficiency Curves	CreateXYScalarPlot( AVG(ILOAD), Efficiency_4.5, AVG(ILOAD) Efficiency_4.5, DVM Vin Min, DVM Efficiency , A1, vert, usescalars=multi xlabel=Load Current xunits=A ylabel=Efficiency yunits=%%% showpoints=true color=red )	CreateXYScalarPlot( AVG(ILOAD), Efficiency_5, AVG(ILOAD) Efficiency_5, DVM Vin Nom, DVM Efficiency , A1, vert, usescalars=multi xlabel=Load Current xunits=A ylabel=Efficiency yunits=%%% showpoints=true color=green )	CreateXYScalarPlot( AVG(ILOAD), Efficiency_5.5, AVG(ILOAD) Efficiency_5.5, DVM Vin Max, DVM Efficiency , A1, vert, usescalars=multi xlabel=Load Current xunits=A ylabel=Efficiency yunits=%%% showpoints=true color=blue )	PromoteGraph( DVM Efficiency , 1 )