***
*** 6.4.2_promotegraph.testplan: promotegraph testplan for DVM tutorial section 6.4.2
***
*?@ analysis	objective	jumper	measurement	measurement	measurement	measurement	measurement	source	load	label
***
Ac	BodePlot(OUTPUT:1)	Close(J1)			Alias(gain_margin,gain_margin_nom)	Alias(phase_margin,phase_margin_nom)	Alias(gain_crossover_freq,gain_crossover_freq_nom)	Source(INPUT:1, Nominal)	Load(OUTPUT:1, Light)	VOUT=1.505V|Bode Plot|Vin Nominal|Light Load
Ac	BodePlot(OUTPUT:1)	Close(J1)	PromoteGraph( BODE PLOT, 100, 1, Bode Plot Nominal Vout )	PromoteGraph( LOAD, 90, 1 )	Alias(gain_margin,gain_margin_nom)	Alias(phase_margin,phase_margin_nom)	Alias(gain_crossover_freq,gain_crossover_freq_nom)	Source(INPUT:1, Nominal)	Load(OUTPUT:1, 50%)	VOUT=1.505V|Bode Plot|Vin Nominal|50% Load
Ac	BodePlot(OUTPUT:1)	Close(J1)			Alias(gain_margin,gain_margin_nom)	Alias(phase_margin,phase_margin_nom)	Alias(gain_crossover_freq,gain_crossover_freq_nom)	Source(INPUT:1, Nominal)	Load(OUTPUT:1, 100%)	VOUT=1.505V|Bode Plot|Vin Nominal|100% Load
***
***	these tests use the new modified values
***
Ac	BodePlot(OUTPUT:1)	Open(J1)			Alias(gain_margin,gain_margin_600mV)	Alias(phase_margin,phase_margin_600mV)	Alias(gain_crossover_freq,gain_crossover_freq_600mV)	Source(INPUT:1, Maximum)	Load(OUTPUT:1, Light)	VOUT=0.6V|Bode Plot|Vin Maximum|Light Load
Ac	BodePlot(OUTPUT:1)	Open(J1)	PromoteGraph( DVM BODE PLOT#log#ac, 80 )	PromoteGraph( DVM LOAD#pop )	Alias(gain_margin,gain_margin_600mV)	Alias(phase_margin,phase_margin_600mV)	Alias(gain_crossover_freq,gain_crossover_freq_600mV)	Source(INPUT:1, Maximum)	Load(OUTPUT:1, 50%)	VOUT=0.6V|Bode Plot|Vin Maximum|50% Load
Ac	BodePlot(OUTPUT:1)	Open(J1)			Alias(gain_margin,gain_margin_600mV)	Alias(phase_margin,phase_margin_600mV)	Alias(gain_crossover_freq,gain_crossover_freq_600mV)	Source(INPUT:1, Maximum)	Load(OUTPUT:1, 100%)	VOUT=0.6V|Bode Plot|Vin Maximum|100% Load
***